Author Box
Articles Categories
All Categories
Articles Resources

Operator Considerations for Tool Safety When Working at Height

February 22, 2012 | Comments: 0 | Views: 169

In order to ensure the safety of workers at height as well as those moving beneath them, the UK government adopted new European safety regulations back in 2005. Those regulations were amended in 2007 and have since been fined tuned in-line with British Standards and localised dispensation to what we have today. Unfortunately, when talking about at height safety the one component of the equation often forgotten is the worker himself. Yet he is an important part of the safety equation and needs to be considered just as much as safety equipment and the specific tools required.

Since a worker's continued job security and future advancement depends largely on his productivity, it stands to reason that safety may not always be his first priority if it conflicts with productivity. This is not to excuse such an attitude, but rather to suggest that it is reality. Therefore, operator considerations need to be part of the development of job site planning and safety procedure development. Planners must look at all the conditions surrounding the application and what individuals will be exposed to.

Working from MEWPS and in Tight Spaces

One of the most common difficulties experienced by working at height is trying to complete tasks in tight and confined spaces. For example, a worker who is elevated to his work area by powered access only has so much room to move around. If that basket is full of tools at the same time, it may limit his space even further. When a worker is in this type of position he can easily become frustrated and irritable. That can in turn lead to carelessness when it comes to properly securing and using hand tools. A solution to this problem can be to use specialist tool bag attached to the MEWP rail which has the necessary tool anchor points for securing tool lanyards.

Managers may believe that a single type of generic access system is sufficient because it meets the minimum requirements and is the least expensive option. Yet if those supervisors have never worked with that particular type of system in that environment, they may be unaware that it might not be inappropriate. In other words, the cheapest system that meets minimum requirements is not always the best.

Efficiency of Tool Safety Systems

Another problem area for workers is the efficiency of tool safety systems or lack of. Often times this problem comes by way of employers who tend to use a "one-size-fits-all" mentality when purchasing tool lanyards, tool belts, and other tool safety equipment or try to make something in-house with gaff tape and string etc. Operator considerations dictate that managers and supervisors communicate with workers in order to determine the most efficient way to secure tools safely, with consideration around suitability for the scope of activity and the type of tool used.

Things that need to be considered include easy accessibility of tools, the ability to use said tools without hindrance, the ability to easily holster and un-holster tools, efficiency in moving tools around the work space, and so forth. A worker who has easy access to his tools is a happy worker. Furthermore, a worker whose tasks are not hindered by inappropriate lanyards and tethers is one who is likely to be more productive, safe and compliant.

An example of what we're talking about here would be a scaffolder who works on commercial buildings. He may have only three or four hand tools to work with, but properly securing even such a small number can be problematic. If those tools are secured with lanyards which are much longer than they need to be, those lanyards can get tangled with one another or, worse yet, with safety ropes. Consideration should be given to suitability i.e. how long a lanyard needs to be for this type of environment, or if they require a swivel link to reduce tangling.

Weather Conditions

Regardless of the types of safety equipment used, weather always plays an important part in job safety. For example, rainy weather can make tools very slippery which could result in greater risk of injury to employees.

Cold weather is another safety concern that needs special consideration. It has been documented that when individuals are exposed to cold weather for long periods of time, they tend to not think as clearly or react as quickly. This is a recipe for accidents under certain conditions. Whether talking about cold weather, rain, or even extremely high temperatures during the summer months, conditions need to always be taken into consideration when sending workers to work at height with tools. Daily routines need to be modified in order to accommodate current weather conditions, impacting on the scope of activity and equipment being fit for purpose.

Pay Attention to Operator Concerns

Managers and supervisors need to make every effort to pay attention to operator individual considerations. After all, your workers are the ones doing the work at height with associated exposure. Their opinions about what works best practically are often valid, even though you may not initially think so. A consistent and open dialogue between workers and managers is the best way to ensure that all safety regulations are met while at the same time respecting the needs of individual workers.

On the other hand, managers and supervisors who ignore worker considerations are just asking for trouble. Remember that we started this guide by proposing the idea that safety may not be the first consideration of a worker if it conflicts with his other interests. Supervisors must never forget that this is human tendency. If worker concerns are not taken into consideration by managers and supervisors, they are increasing the likelihood that those workers will cut corners when they feel it's necessary to get their jobs done regardless.

One of the best ways to ensure good communication between managers and workers is to provide incentives for achieving a certain number of accident free days. Some companies use a monetary reward while others may provide workers with free lunch or some other type of benefit. These types of incentives encourage workers to go to their managers with concerns. It also encourages managers to listen to those concerns and find solutions to them. When both parties work together to ensure safety it results in a more pleasant and productive work environment.

Ultimately training is the key to behavioural changes, collective cooperation and fit for purpose tool solutions.

Read more: Leading Edge Tools at Height Guidance

Leading Edge is well known for height safety training and as a manufacturer of safety equipment. Our extensive knowledge of height safety equipment and expertise in specialist safety critical manufacturing, has allowed us to develop a substantial premium range of tool safety products for the prevention of dropped tools and objects. Please visit site for more guidance and view our wide range of products for Tool and dropped objects prevention at Height

Source: EzineArticles
Was this Helpful ?

Rate this Article

Article Tags:

Dropped Tools


Tool Lanyard


Tool Tethers


Dropped Objects


Working At Height Tool Safety Guidance

In India, employment opportunities are set to grow by a good margin in the coming year, a phase which was started in the turn of the second decade of the 21st century. organisation, candidates with

By: Sarkariexam l Business > Careers Employment l April 01, 2013 lViews: 11720

Sometimes it is amazing to see that certain jobs can precipitate huge turnouts in the recruitment drives. It is as if thousands of people were waiting for the vacancy advertisements and the moment

By: Sarkariexam l Business > Careers Employment l December 30, 2012 lViews: 692

In recent times, jobs in healthcare segments have grown tremendously. It is anticipated that this growth curve will continue for the times to come. Various factors are responsible for this

By: Sarkariexam l Business > Career Advice l December 27, 2012 lViews: 449

Are you in a dilemma whether to choose web based CRM or not? If yes, don’t worry. You aren’t the sole person having this doubt.There are numerous firms trying to make out whether investing in a

By: Reneta Vasileva l Business > Customer Service l December 23, 2012 lViews: 410

If you think about it you will realize the fact that each business has its own set of risks that are involved in it.The trade secrets that you have and the information related to the business is what

By: brumbrum1 l Business > Risk Management l December 23, 2012 lViews: 264

As the time is changing, concierge management services are now growing despite the slowing economies of the world. The main reason of it is the need that is highly specific to the people who like to

By: willsmith10 l Business > Management l December 23, 2012 lViews: 334

Over 33% of all major injuries reported each year are caused as a result of Slips or Trips and are the cause of over 10,000 serious injuries per year. The majority of Slips or Trips in the workplace

By: Nigel J Welfordl Business > Workplace Safetyl June 12, 2012 lViews: 219

Accident reporting is a fundamental requirement of any business and here we try and give a guide to business owners. All workplace accidents need be reported so they can be investigated to see if any

By: Nigel J Welfordl Business > Workplace Safetyl June 12, 2012 lViews: 254

Workwears are designed to offer maximum protection for you and your workers. But know this; you can optimize the benefits of these personal protective equipments even more.

By: Steven Michaelsl Business > Workplace Safetyl June 10, 2012 lViews: 210

There are many companies that make and sell safety awareness banners. We see a lot of great banners and an equal number of what we consider as poor quality banners. Sometimes, companies even try

By: Alan B Sudfeldl Business > Workplace Safetyl June 09, 2012 lViews: 192

A safety policy can set the direction for a SMS or be just a decoration on the reception wall. How to write a safety policy that works...

By: Dave S B Hughesl Business > Workplace Safetyl June 09, 2012 lViews: 232

As a business owner you have a legal duty to ensure the safety and security of your staff - including those that you may not see very often due to shift patterns or if they are visiting clients or

By: Nigel J Welfordl Business > Workplace Safetyl June 08, 2012 lViews: 233

In case you're unaware, the Work at Height Regulations implemented in 2005 governs not only the proper use of safety equipment and procedures, but also the requirement for companies to have rescue

By: N. Stuart Beardmorel Business > Workplace Safetyl February 22, 2012 lViews: 184

Managing work and how it is undertaken is important not only for the financial success of a business, but also for quality and safety purposes. Nowhere is this more important than in the arena of

By: N. Stuart Beardmorel Business > Workplace Safetyl February 22, 2012 lViews: 174