Author Box
Articles Categories
All Categories
Articles Resources

Measuring Tools: Compasses

February 23, 2012 | Comments: 0 | Views: 200

Drawing circles

I like to set my compass with a steel rule. I set the steel point into the etched graduation at the 1" mark and then adjust the drawing point to the desired radius (plus 1"). Although the steel point of a compass generally does an adequate job of holding its place, I've found that making a slight starter hole with an awl helps keep the point from wandering as the compass is rotated to mark the circle or arc.

Dividing circles

Here's a quick way to convert a circle to a hexagon or lay out six equally spaced holes (such as for spindles or mounting holes). With the compass still set to the desired radius, place the steel point on the perimeter of the circle and rotate the compass until it scribes a mark across the perimeter. Then move the steel point to this location and scribe another mark. Continue like this all the way around the circle - you'll end up where you started.


A spring divider differs from a compass in that both legs hold metal points instead of a single point and a pencil or pencil lead. The legs of the dividers are opened or closed by adjusting a knurled nut on one of the legs. Although you can use dividers to scribe circles or arcs, they are more commonly used for layout to "divide" (hence the name) or step out equal distances, often referred to as stepping off a measurement.


Thought of mostly as machinists tools, dial and slide calipers can be quite useful in the woodworking shop. Although you rarely need to measure in thousandths of an inch, these precision tools are great for measuring small parts and checking the thickness of a work-piece. Slide calipers are not as easy to read as dial calipers. Whoever came up with the idea of adding the dial deserves a medal, in my opinion. The bodies of slide calipers are usually metal, whereas you can find dial calipers with either metal or plastic bodies. The latest in calipers takes advantage of digital technology and offers a numeric readout (though these can be quite pricey).


I've been using dial calipers for years to measure the thickness of stock. I use one so regularly for this that it resides in my planer stand. Once you get used to using one of these, you'll wonder how you ever lived without it. Look for one with a dial that has 1/64" measurements as well as thousandths.

Depth gauge

Most dial and slide calipers can also be used as very accurate depth gauges. Just position the end of the caliper over the hole to be measured. Open the sliding jaw until the rod on the end of the caliper bottoms out in the hole; then read the dial.


Finding the center of a workpiece is a common layout task. It's so common that a number of tool manufacturers make plastic center finders, like the one shown in the top photo, specifically for this task. These simple tools have lips on two adjacent sides to quickly position the workpiece.

Basic use

To use a center finder like the one shown here, press the edges of the workpiece up against the lips of the center finder. Then butt a pencil or marking knife up against the center cutout and draw along this to mark a line on the workpiece. Next, rotate the work-piece 90 degrees and make another mark. Where the lines intersect is dead center.


Trammel points (also called a beam compass) come in handy when you need to draw a large-diameter circle or arc. Trammel points are a set of steel points that can be mounted on virtually any length beam, as long as it's straight. The heads are held in place by tightening a knurled knob on top of each trammel point. Some versions include an accessory head that accepts a standard pencil, in case you'd prefer a pencil line to a scribed line. Bridge City Tool Works manufactures a gorgeous tool that features a beam with a built-in metal rule.

Basic use

Just like the panel gauge, trammel points require two hands for use. One hand holds one trammel at the pivot point, while the other hand moves the opposite head in a graceful arc or circle to mark the work-piece. Keep the points razor-sharp and you'll need to apply only light pressure to mark your workpiece.

Stick trick

If you don't own a set of trammel points and need to draw a large-diameter arc or circle, try this crude but effective substitute. Simply drill a pair of small holes the desired distance apart in a thin stick. Use an awl or a brad to temporarily hold one end at the pivot point, and insert a pencil or awl in the other hole to scribe or mark the arc or circle. Naturally this isn't anywhere near as accurate as a good set of trammel points, but it'll do in a pinch.


If you're drawing-challenged, like me, you'll find a set of French curves a real boon when it comes time to lay out graceful curves for a project. French curves are available individually or in sets in a wide variety of shapes and sizes. Most are made of sturdy acrylic and may be clear or tinted. I prefer the clear curves, as this allows me to easily see the grain so that I can position the curves to maximize interesting grain patterns. French curves are available in most woodworking catalogs and at any art store.

Basic use

I most often use French curves to create patterns or templates (such as the cabriole leg). Slide the curve up and down along the workpiece until the desired curve is found. Then trace around the curve with a pencil or marking knife (I generally use a pencil, since a marking knife can cut and nick the plastic). French curves can also be used to lay out ovals. Here again, position the curve until the desired shape is obtained, and trace around it. A pair of light pencil marks on the curve will help you align it for the remaining quadrants.

You are looking for Simple Woodworking Projects? Just read my Idea Woodworking Plans Review

Source: EzineArticles
Was this Helpful ?

Rate this Article

Article Tags:

Woodworking Tools


Measuring Tools


Idea Woodworking Plans Review

Since time immemorial unscrupulous folk have existed. The world continues to see them and they would continue to exist to the end of the world. The best you could do is sensitizing yourself to detect

By: Zuneaoy l Home & Family > Crafts Supplies l December 11, 2012 lViews: 582

What does it take to find the best prices and greatest selection when searching for jewelry supplies? Because jewelry making has become such a popular hobby, there is no shortage of locations where

By: Zuneaoy l Home & Family > Crafts Hobbies l December 11, 2012 lViews: 250

You can purchase the same thing online for a much cheaper price. Now, granted, you may find that some beads and snake bracelets are just as expensive as at the store, but you will find that online

By: Zuneaoy l Home & Family > Crafts Supplies l December 07, 2012 lViews: 331

Arborist is simply called as the nature maker in the words of a poet. They really make your garden clean, healthy and tidy. When you are having tress at your place it is necessary to check them up or

By: noragwilt l Home & Family > Gardening l November 20, 2012 lViews: 311

To make sure you gain true protection, it is of paramount importance that these covers ought to be durable and strong. To make sure you gain true protection, it is of paramount importance that these

By: Simon Liva l Home & Family > Entertaining l November 16, 2012 lViews: 269

If you wish to throw a birthday celebration party, you should have a lot of money. A number of people think that if perhaps they cannot dedicate such a lot money for the celebration, it won’t

By: jhoel mojokuvic l Home & Family > Entertaining l November 12, 2012 lViews: 286

Homeowners across the United Kingdom strive to establish and maintain true quality within all features of their property. As a home ultimately reflects its owners, it is important to create a

By: Adam Nicolsonl Home & Family > Woodworkingl August 17, 2012 lViews: 370

CNC machinery is distinguished from most types of woodworking machinery in two ways-a computer controls it, and its price can range from moderately expensive to seemingly unaffordable. If you are

By: Mike Baronel Home & Family > Woodworkingl April 20, 2012 lViews: 202

  Depending on the type of products you produce, and the type of machinery you need to produce them, the cost of woodworking equipment can become an obstacle to your business. Many woodworkers begin

By: Mike Baronel Home & Family > Woodworkingl April 20, 2012 lViews: 230

Buying a CNC machine is most the important machinery purchase most woodworkers make; it is also one of the most expensive purchases they make. Costing anywhere from $4,000 to $1 million, such a

By: Mike Baronel Home & Family > Woodworkingl April 20, 2012 lViews: 184

The high value of CNC (Computer Numerically Controlled) machinery, both monetarily and to the woodworking process, makes evaluating its reliability is a primary concern for woodworkers. When a CNC

By: Mike Baronel Home & Family > Woodworkingl April 20, 2012 lViews: 215

Firewood sheds are more than a pretty way to stack firewood. They are designed to help properly season firewood by keeping it dry and allowing air to move around the wood.

By: Christopher Kenalul Home & Family > Woodworkingl April 17, 2012 lViews: 476

Marking gauges are extremely useful for marking lines parallel to an edge with great accuracy, such as when you're laying out joints to be cut. A marking gauge basically consists of four parts: a

By: Alan Usenl Home & Family > Woodworkingl February 26, 2012 lViews: 199

Even though rasps closely resemble files, they're very different beasts. Instead of single rows of teeth cut into the metal surface at an angle, rasps have tiny individual teeth in parallel rows. And

By: Alan Usenl Home & Family > Woodworkingl February 18, 2012 lViews: 186

Once your jack plane or jointer plane is well tuned, there's one more thing to do before you use it: You need to adjust it to match the type of cut you're making. I'm not talking about depth of cut

By: Alan Usenl Home & Family > Woodworkingl February 15, 2012 lViews: 163

After a good jack plane and a low-angle block plane, the next plane I'd suggest a beginning woodworker purchase is a quality shoulder plane. Shoulder planes excel at trimming and fine-tuning joints.

By: Alan Usenl Home & Family > Woodworkingl February 15, 2012 lViews: 228