Author Box
Articles Categories
All Categories
Articles Resources

Industrial Degreasers: Tips for Choosing the Right Heavy-Duty Degreaser

June 13, 2012 | Comments: 0 | Views: 186

A conventional industrial degreaser contains harsh chemicals that remove grease, oil, and organic resin from equipment parts. In many cases, these chemicals harm more than the environment; they also harm the health of those who use them. If your company uses a parts washer solvent or another degreaser that contains toxic chemicals, now is the time to replace it with a safer product by following the tips below.

Choose a Product that Contains No HAPs

The Clean Air Act identifies Hazardous Air Pollutants (HAPs) as chemicals that are known or suspected to damage the environment and human health. In addition to risking fines for emissions violations, companies that use HAP laden solvents increase the likelihood of sick days being taken and workers comp claims being filed due to HAP related illnesses. Illnesses that result from HAP exposure have also precipitated successful liability lawsuits against employers.

Choose a Product that Contains as Few VOCs as Possible

Volatile Organic Compounds (VOCs) are carbon-based compounds that vaporize at room temperature. Not all VOCs are classified as HAPs, but even those that are not can adversely affect human health when they are present in sufficient quantities. Personal Protective Equipment (PPE) and a good ventilation system help reduce the health risks of VOC exposure, but choosing a parts washer solvent that contains as few VOCs as possible reduces the risks even more.

Choose a Product that has a High Flash Point

An industrial degreaser that has a high flash point reduces the risk of building fires. Degreasers that have a low flashpoint can cause fires when they are used on equipment that must stay energized. They also increase the risk of fire in the areas where they are stored. The definition of a high flashpoint is relative to the application for which a degreaser is used. In most cases, a low flashpoint is defined as one that is below 150°C.

Choose a Product that Leaves No Residue

When a solution leaves a residue, it causes parts to gather dirt that penetrates the gears and housing of sensitive electrical components. In some instances, prolonged use of a residual degreaser can make equipment stop working until it is reconditioned. Solutions that leave behind a residue may be inexpensive due to their simple formulation, but the damage they cause to equipment can be costly indeed.

Choose a Non-Corrosive Product

Some degreasers are corrosive to the rubber and plastic components that surround metal parts. To protect these components from corrosion, choosing a solution that is non-corrosive to commercial grade plastic and rubber is essential.

Conclusion

An industrial degreaser does not need toxic chemicals to be effective. Today, organic and environmentally preferred solutions that work as effectively as conventional ones are readily available. Two of these solutions are the environmentally preferred MIL-PRF-680 Type II degreaser cleaner for solvent parts washers, and the organic Vortex citrus cleaner and heavy-duty degreaser. If your company uses a parts washer solvent or another degreaser that contains dangerous chemicals, replacing it with these solutions will help protect the environment and the health of workers.

The industrial degreaser a company uses could affect their emissions status. To avoid EPA fines, companies should use an eco friendly parts washer solvent.

Source: EzineArticles
Was this Helpful ?

 
0
 
0
 
Rate this Article
 vote(s)
Feedback
Print
Re-Publish

Article Tags:

Industrial Degreaser

,

Parts Washer Solvent

There is different types of locksmiths available to install, maintain and repair locks and keys. Here in this article, we are going to discuss four major types of professional locksmiths. The most

By: jamescor l Home Improvement > Security l April 03, 2013 lViews: 563

Another point to note is that the leather sofas can come both in contemporary and traditional designs. Indeed, the traditional Chesterfield sofa. Another point to note is that the leather sofas can

By: Simon Liva l Home Improvement > Furniture l December 23, 2012 lViews: 260

A bathroom is not simply a room in the house for you to bathe, get dressed and do the usual necessities. Today, the bathroom is where you unwind and relax from all the anxiety of the day. For this

By: jhon ford l Home Improvement > Bath and Shower l December 23, 2012 lViews: 273

These bathroom designers know and understand your requirements and have the power to convert your imagination into reality. These bathroom designers know and understand your requirements and have the

By: Simon Liva l Home Improvement > Bath and Shower l December 23, 2012 lViews: 1189

Having the baby furniture ready before your baby comes is not only practical but makes the choosing and designing of the baby’s room fun. The reason for this is that you can take a longer time in

By: Leanne Smith l Home Improvement > Furniture l December 14, 2012 lViews: 284

With a team of professionals around, you don’t need to worry about the health of the carpet. A Professional carpet Melbourne Company refrains from using harmful chemicals to accomplish their task.

By: Simon Liva l Home Improvement > Cleaning Tips and Tools l December 12, 2012 lViews: 445

As a testament to the economic benefits of "going green," a global survey by Tandberg - a subsidiary of Cisco Systems - recently revealed that fifty-three percent of consumers prefer to buy from

By: Timothy Byronl Home Improvement > Green Livingl June 13, 2012 lViews: 169

MIL-PRF-80 is a petroleum-based solvent that removes oil, grease, and organic resins from the engines of aircraft, ground equipment, and industrial machines. MIL-PRF-680B is the accepted industrial

By: Timothy Byronl Home Improvement > Green Livingl June 13, 2012 lViews: 245

For almost fifty years, P-D-680 was the degreaser used by most companies in the industrial sector, but in 1999, most companies canceled the solvent when the Environmental Protection Agency (EPA)

By: Timothy Byronl Home Improvement > Green Livingl June 13, 2012 lViews: 183

Despite the fact that many are not quite conversant with soil remediation as a process of purifying and revitalizing the soil; it is vital in the environment in regards to restoring healthy and

By: Johnny Kilroyl Home Improvement > Green Livingl June 13, 2012 lViews: 179

A soil remediation process can prove worthwhile in contaminated land if ideal methods of decontamination, treatment and removal of volatile elements in the soil are keenly adhered to. For total

By: Johnny Kilroyl Home Improvement > Green Livingl June 13, 2012 lViews: 202

Solar power is derived from the sun which is an ample source of energy. Use of solar energy has many advantages. Not only is it cheaper in the longer term, it also benefits the environment.

By: Lori Tomlinl Home Improvement > Green Livingl June 12, 2012 lViews: 163

As a testament to the economic benefits of "going green," a global survey by Tandberg - a subsidiary of Cisco Systems - recently revealed that fifty-three percent of consumers prefer to buy from

By: Timothy Byronl Home Improvement > Green Livingl June 13, 2012 lViews: 169

MIL-PRF-80 is a petroleum-based solvent that removes oil, grease, and organic resins from the engines of aircraft, ground equipment, and industrial machines. MIL-PRF-680B is the accepted industrial

By: Timothy Byronl Home Improvement > Green Livingl June 13, 2012 lViews: 245

For almost fifty years, P-D-680 was the degreaser used by most companies in the industrial sector, but in 1999, most companies canceled the solvent when the Environmental Protection Agency (EPA)

By: Timothy Byronl Home Improvement > Green Livingl June 13, 2012 lViews: 183

Parts cleaning can occur with a solvent or water based solution depending on the type of contamination being removed and required strength. High temperatures increase the results of this process due

By: Timothy Byronl News & Society > Environmentall April 16, 2012 lViews: 172

A variety of cleaning agents contain volatile organic compounds (VOCs) that vaporize into the air at normal room temperatures. Solvents are used to dissolve substances, in coating dispersal

By: Timothy Byronl News & Society > Environmentall April 16, 2012 lViews: 119

Parts washer solvent can be applied by spraying, immersion, or brushing, depending on the extent of cleaning and the size of the component. Immersion involves placing the components into a solution

By: Timothy Byronl News & Society > Environmentall April 16, 2012 lViews: 120

Discuss this Article

comments powered by Disqus