Author Box
Articles Categories
All Categories
Articles Resources

Vinyl Floor Tiles Won't Stick

February 27, 2012 | Comments: 0 | Views: 255

Vinyl floor tiles are a durable floor covering that can be adhered in a number of ways. You can install the tiles with adhesive and grout like hard tiles, or you can lay them with peel-and-stick backing. Both options are suitable for do-it-yourself homeowners with moderate experience.

While vinyl tiles are moderately simple to install, there may be occasions when a tile does not remain stuck to the substrate. Taking pains to avoid this can result in a long-lasting floor tile installation.

Substrate Has Not Been Prepped

Vinyl tiles, particularly those with peel-and-stick backing, need a perfectly smooth, flat surface with which to adhere. A substrate that has dirt, dust or other debris will keep the tiles from adhering properly by not giving adequate contact between the tile and the substrate. Sweep, then damp-mop all substrates before laying the tiles to ensure adequate adhesion.

Prep plywood substrates by applying an adhesive primer to the plywood. This will level the floor, fill in any gaps and give the vinyl tile a surface to adhere to.

Likewise, old vinyl or linoleum tiles acting as the substrate must be stripped of wax before you can install the new tiles on top.

Inadequate Pressure

Part of the bonding process of the vinyl tiles to their substrate requires significant pressure on the tops of the tiles. You achieve this through rolling the tiles. While you can use a rolling pin for light traffic or wall applications, it does not provide enough pressure for floor tiles that are undergoing heavy traffic. For these areas, you'll need a floor roller.

Rent a floor roller from your local home improvement store. Roll it across the surface of the tiles multiple times. It will exert enough pressure to bond the tiles to their substrate.

Temperature Differences

If the vinyl tiles were stored outside in a garage or another unheated area, then brought inside and installed on a warmer, room-temperature substrate, the tiles may not stick. The soft floor tiles must be brought to the same temperature as the substrate to allow for proper bonding of the adhesive.

Bring the tiles into the room where they will be installed 48 to 72 hours in advance of installation. Alternatively, bring the tiles in 24 hours beforehand and raise the temperature of the room to 75 degrees. Keep the room at this temperature throughout installation, then allow the floor to cool at once. The contraction of the cooling tiles will tighten the bond.

Excess Moisture

If the vinyl tiles are being installed over concrete or in a basement, there may be too much moisture in the substrate to allow the adhesive to dry properly. The result is tiles that come up easily, instead of bonding and growing stronger with time.

If the concrete floor is new, give it time to cure; go by the recommended manufacturer's curing time for the type of concrete used. If the floor is damp because it is at ground level, either seal it with a product used with vinyl tiles to inhibit moisture or run a dehumidifier for 24 hours to dry out the floor. Then install the tiles.

Know more aboutFloor TilesFloor Tile

Source: EzineArticles
Was this Helpful ?

Rate this Article

Article Tags:

Floor Tiles


Vinyl Tiles


Vinyl Floor Tiles


Vinyl Floor


Floor Tiles Wont

There is different types of locksmiths available to install, maintain and repair locks and keys. Here in this article, we are going to discuss four major types of professional locksmiths. The most

By: jamescor l Home Improvement > Security l April 03, 2013 lViews: 562

Another point to note is that the leather sofas can come both in contemporary and traditional designs. Indeed, the traditional Chesterfield sofa. Another point to note is that the leather sofas can

By: Simon Liva l Home Improvement > Furniture l December 23, 2012 lViews: 260

A bathroom is not simply a room in the house for you to bathe, get dressed and do the usual necessities. Today, the bathroom is where you unwind and relax from all the anxiety of the day. For this

By: jhon ford l Home Improvement > Bath and Shower l December 23, 2012 lViews: 273

These bathroom designers know and understand your requirements and have the power to convert your imagination into reality. These bathroom designers know and understand your requirements and have the

By: Simon Liva l Home Improvement > Bath and Shower l December 23, 2012 lViews: 1188

Having the baby furniture ready before your baby comes is not only practical but makes the choosing and designing of the baby’s room fun. The reason for this is that you can take a longer time in

By: Leanne Smith l Home Improvement > Furniture l December 14, 2012 lViews: 283

With a team of professionals around, you don’t need to worry about the health of the carpet. A Professional carpet Melbourne Company refrains from using harmful chemicals to accomplish their task.

By: Simon Liva l Home Improvement > Cleaning Tips and Tools l December 12, 2012 lViews: 444

There are several advantages to choosing antique heart pine flooring for you remodeling project. It offers an environmentally friendly option that is both versatile and durable.

By: Andrew Strattonl Home Improvement > Flooringl July 10, 2012 lViews: 221

The Oriental rug that has graced your dining room for many years shows evidence of staining. Your living room carpet, a high-traffic area that's a favorite place for relaxing and play indoors,

By: Kathryn Livelyl Home Improvement > Flooringl July 10, 2012 lViews: 211

There are numerous factors which are to be considered while deciding upon the style of the carpet underlay for the new floors. The most looked in factors includes the installation process, the

By: John Samuall Home Improvement > Flooringl July 10, 2012 lViews: 308

It can be a serious problem in determining the best underlay for the floor initially but with some key factors in mind the choice can be simplified. It is known that this material is basically used

By: John Samuall Home Improvement > Flooringl July 10, 2012 lViews: 292

Carpet underlays are also known as the padding of the carpet or as its cushion. It is very important that the carpet underlay should properly be compatible with the carpet and should actually

By: John Samuall Home Improvement > Flooringl July 10, 2012 lViews: 309

To make the flooring and the carpet of the house to last longer it is highly advisable to install a carpet underlay which is a textile coating filled in between the carpet and the floor. This along

By: John Samuall Home Improvement > Flooringl July 10, 2012 lViews: 303