Author Box
Articles Categories
All Categories
Articles Resources

Why My Clutch Is Smoking On My Go Kart

January 06, 2012 | Comments: 0 | Views: 269

I have written several commentaries on this subject in the past, but I think it warrants rehashing, because there are two possible reasons why your clutch is smoking. I usually discuss one most likely reason, but in this article let's talk about the two possible causes of why your clutch is smoking on your go kart.

First the fundamental understanding of go karts is needed. The drive line typically consists of a clutch driver and the driven axel sprocket. The driven axel sprocket is mounted directly to the rear driver axel which turns the drive wheels. This is a one step system, or a one ratio system.

The centrifugal clutch which is used on most go karts, uses weights that are mounted internally in the clutch that fling out and press against the clutch bell housing. The bell housing then in turn moves the sprocket driving sprocket teeth.

The typical clutch has 10 to 12 sprocket teeth. As a rule of thumb any clutch that has more than 10 to 12 sprocket teeth is going to give trouble to the drive line. Trouble as in smoking clutch.

The engagement of the weights to clutch bell housing occurs at a certain rpm. Typically this rpm is around 1800 to 2000 rpm. The engine needs to blast through this level of rpm and get the clutch pack to stick and finally engage to the walls of the clutch bell. The smoking aspect occurs when the clutch is engaging but is not fully grabbing. If the prolonged engagement occurs for too long, the clutch will start to smoke and eventually damage it to where the weights will only slip and perhaps even crack and break apart.

As I stated at the start of the article, the prolonged engagement occurs because of two possible reasons:

1.) The engine is not powerful enough to get past the engagement stage

2.) The clutch weight rpm is not high enough.

The engine not being powerful enough typically is the result of a mismatch in ratios to the rear drive wheels. So the real reason is that the ratio is not steep enough, and therefore the engine smokes the clutch.

(Another possible issue can occur and that is if the clutch is made to engage at lower rpm than the engine can grab at, the engine may not have enough power, and the engine will suddenly (more like violently) shudder and stop. It is not uncommon for the engine to be so overpowered that it rotates backwards momentarily.)

The second way the clutch will smoke is if the clutch rpm never reaches engagement speed, or it is in the neighborhood of engagement speed, but is not high enough above the engagement speed to get a lock. This will smoke the clutch and is prevalent in mismatched jackshaft systems.

The remedy for the first clutch smoking problem, is to alter the drive line so that the overall ratio is steeper. The simple method is to increase the rear sprocket diameter. Programs have been written that will estimate if you clutch will smoke or not, they typically are found on web pages or are available for purchase through various web pages. Typically what occurs is that the hp-ratio just will not be possible using the simple one ratio system. So a jack shaft needs to be added to make the ratio even steeper. In other words, making it a two ratio system.

This is where guys who install jackshafts need to be aware. The clutch typically cannot be put on the driver of the jackshaft, with a ratio in front of it. This will make the clutch rotate too slowly, even though the overall ratio is correct. So the clutch engagement rpm needs to be taken into account otherwise the clutch will smoke on the secondary jackshaft mounting position.

The bottom line is if clutch is not engaging because of either too little hp, or too slow of a clutch speed then the system need to be changed by altering the ratios either behind the clutch or in front of the clutch.

Robert Gamble is a go kart building expert with over 25 + years of experience. He has various published works on go kart building from metal framed go karts, wood go karts and even pedal go karts. Using his engineering background he has developed several in depth and easily understood books on drivelines.

In particular the Vertical Engine Drive book series consists of graphs and charst as well as computer program that you can plug your drive system into and get results for whether or not your clutch will smoke. The program even give recommendations about how to change your drive line so that the go kart can climb hills without smoking the clutch. Goto for more details.

Source: EzineArticles
Was this Helpful ?

Rate this Article

Article Tags:

Smoking Clutch


Centrifugal Clutch


Comet Clutch


Go Kart Clutch




Clutch Sprocket


Gokart Chain

If you have problems in maintaining your used Sacramento Ford car model, then this is the right time to approach the Ford auto repairing mechanic to get things fixed in time. This is to ensure that

By: Nick Pruett l Automotive > Classic Cars l April 03, 2013 lViews: 599

This article is written about a company offering stunning range of mopeds and eco friendly scooters at affordable prices . Gas powered scooters are the perfect means of transport if you want to

By: Mark Claint l Automotive > Motorcycles l December 23, 2012 lViews: 591

The Mahindra bikes are the top most important and supposed developed company in India, which is productively liability their business in the Indian auto market with its dealership networks across the

By: Wilson Roy l Automotive > Motorcycles l December 03, 2012 lViews: 269

CARTATTS, a design driven, boutique studio with a passion for cars and design have launched their first release of tattoo inspired, custom-designed, high quality decals. CARTATTS is the brainchild of

By: AlanRichard l Automotive > Car Detailing Customization l December 02, 2012 lViews: 254

When it comes to going on a road trip, the drive there can sometimes end up being a bit boring. Though you might have a fantastic time once you arrive at your holiday destination, if there is a long

By: Alan Trotter l Automotive > Mobile Audio Video l November 24, 2012 lViews: 419

Hero impulse is the design of Hero group, after the Hero and Honda group sidelined. The company has introduced its extremely first bike in the market dubbed like Hero impulse. It is an outstanding

By: Wilson Roy l Automotive > Motorcycles l November 19, 2012 lViews: 394

Different types of safety equipments are used by two- wheeler and four-wheeler riders these days. One of the most important equipments used by the two-wheeler riders includes the safety helmets.

By: Vaiv Jaisl Automotive > ATVl May 25, 2012 lViews: 287

The only thing worse than totaling your shiny new Polaris Ranger RZR is knowing that you could have prevented it with the right equipment. There are a ton of Polaris RZR bumper options out there and

By: Kevin R Connorsl Automotive > ATVl May 13, 2012 lViews: 319

The Most Important safety related accessory that you can buy to protect yourself and your passengers is a quality windshield. Before dropping a few hundred bucks on a new windshield, consider the

By: Kevin R Connorsl Automotive > ATVl May 13, 2012 lViews: 210

Owning an ATV means you need access to a wide range of aftermarket discount ATV parts and accessories. All terrain vehicle parts are available online now, and you can have your parts and accessories

By: Eric Freidmanl Automotive > ATVl May 10, 2012 lViews: 228

Pro Armor manufactures a wide selection of seats, enclosures, skid plates, and doors for the Polaris RZR. New for 2012 are Suspensions Seats, Billet iPod cases, and Polaris RZR custom graphics

By: Kevin R Connorsl Automotive > ATVl May 07, 2012 lViews: 264

There are many reasons to invest in the protection of an enclosure for your Polaris Ranger. Cold weather, camo patterns for hunting, backdraft dust from a windshield, excessive moisture, and

By: Kevin R Connorsl Automotive > ATVl May 07, 2012 lViews: 251

What happens when you start changing the size of the rear tire and correspondingly increase the rear drive sprocket at the same time? Will the go kart suddenly go slower? Will the go kart not be able

By: Robert Gamblel Automotive > ATVl January 29, 2012 lViews: 248

The costs of everything are skyrocketing and it appears that the go kart of our dreams is not going to be a reality. Especially after you just priced out the components for a go kart drive system.

By: Robert Gamblel Automotive > ATVl January 16, 2012 lViews: 243

Unfortunately go kart accidents happen and usually end up with tragic results. The sad thing about it all is that the situations could have been avoided had the go kart drivers and owners been aware

By: Robert Gamblel Automotive > ATVl January 11, 2012 lViews: 186

The go-kart plan is so important for that first time go kart builder. When you put together your first go-kart from scratch you will greatly appreciate what a go-kart plan has to offer, from proper

By: Robert Gamblel Automotive > ATVl January 10, 2012 lViews: 413

Discuss this Article

comments powered by Disqus